Retro: ASUS mimic CX200 JTAG hacking 

Back in my university years I have had some issues with an Asus MIMIC CX200 camera. One of them got broken after a firmware upgrade so I have decided to fix it with JTAG. I have successfully got to UrJTAG to read the IDCODE of the S3C4510B, but I was unable to detect the flash. Now I know that I have had to tweak the bus driver and reveng the board a bit.

Here are some pics (shot with my Nokia 6230 in VGA res) about the trick:


Thin albanian wires were soldered directly to the pins.


Live together cry together series 100 Ohm level shifter JTAG adapter to LPT port.


I have designed an addon board to expose the CPU's intresting interfaces (2 serial, USB, JTAG)



It is fun to look back to those pictures from now. After 5 years we got to a state when it is easier and cheaper to buy a Rpi to solve the same problem rather than fixing that board...
[ hozzászólás ] ( 29 megtekintés ) [ 0 trackbackek ] permalink kapcsolódó link ( 3 / 461 )

<< <Előző | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | Következő> >>

 
számláló