VPNC connection fails after upgrading to Ubuntu 13.10 (saucy) 

My corporate VPN connection got broken after I have updated my desktop to Kubuntu 13.10.

First I have started the Networkmanager's vpnc service in debug mode:

sudo /usr/lib/NetworkManager/nm-vpnc-service --debug


When connecting to the VPN the following message had been shown at the end of the log:


S5.5 do xauth reply
[2014-01-12 09:54:00]
/usr/sbin/vpnc: server requested domain, but none set (use "Domain ..." in config or --domain


The KDE networkmanager applet do not provide input for the domain, so it had to be workarounded:

Edit the /etc/NetworkManager/system-connections/[VPN connection name]

And insert the following line under the [vpn] section:

Domain=your_domain

[ hozzászólás ] ( 9 megtekintés ) [ 0 trackbackek ] permalink ( 3 / 178 )
Siemens Gigaset C475IP base station disassembed 

At the local flea market I have found a box with an ethernet port and and a DECT logo. I have bought it just for fun hoping that I will found some kind of embedded Linux running hackable stuff inside. Well after opening it I had to became disappointed.
Just for fun and archiving puposes I post my findings here.

The board markings:
W30852-Q1813-B101-5 and





The board's heart is a PCD80725ELF ARM base microcontroller made by the NXP.

I have not found any relevant information on the web about it, so I have asked the Philips (NXP) support, and they said:

All DECT activities of Philips Semiconductors were transferred to DSP Group in 2007. http://www.dspg.com/English/ They may still have that data sheet archived.


I have contacted with the DSP Group's support but they have not answered.

The other notable parts on the board:
S29AL008 (1Mbit CMOS flash)
CY7C1041CV33 (512Kbit RAM)
Atmel AT45DB161D-SU (2 MByte SPI flash)
Atmel 24C265 EEPROM
CP2200 single chip ethernet controller by Silabs
An unidentified DECT module possibly made by the Siemens
[ 1 hozzászólás ] ( 58 megtekintés ) [ 0 trackbackek ] permalink ( 2.9 / 179 )
Building QCA (Qt cryptographic architecture) library on Ubuntu 13.10 with Qt5 

I have tried to build the QCA library from the KDE git repository (git clone git://anongit.kde.org/qca.git) with Qt5. (The Ubuntu 13.10 distribution ships only QCA built with Qt4 in the repositories).

The cmake failed with:

CMake Error in CMakeLists.txt:
Imported target "Qt5::Core" includes non-existent path

"/usr/lib/x86_64-linux-gnu/qt5/mkspecs/linux-g++-64"

in its INTERFACE_INCLUDE_DIRECTORIES. Possible reasons include:

* The path was deleted, renamed, or moved to another location.

* An install or uninstall procedure did not complete successfully.

* The installation package was faulty and references files it does not
provide.


The solution was creating a symlink from the mkspecs:

sudo ln -s /usr/share/qt5/mkspecs/ /usr/lib/x86_64-linux-gnu/qt5/

[ hozzászólás ] ( 23 megtekintés ) [ 0 trackbackek ] permalink ( 3 / 179 )
Setter/getter method generator for Qt/C++ 

I have ditched together a small form in PHP to generate the setter getter methods for private members:
http://balubati.atw.hu/cpp_setter_getter_generator.php
[ hozzászólás ] ( 3 megtekintés ) [ 0 trackbackek ] permalink ( 2.9 / 122 )
Mplab C18 to Mplab XC8 porting notes 

Just some random notes:


warning: (335) unknown pragma "udata"
...

Remove idata and udata pragmas.


(975) invalid format specifier or type modifier

Change %S string printf format specifier to %s (lower case).


sprintf("\04Fancoil\n";);
Results a malformed string

If the next character after the escaped character is between [a-fA-F] then use a double quote between them:

sprintf("\04""Fancoil\n";);

[ hozzászólás ] ( 25 megtekintés ) [ 0 trackbackek ] permalink ( 2.9 / 154 )

<< <Előző | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | Következő> >>

 
számláló