AVTECH AVC793ZC-B PCB 

[ hozzászólás ] ( 203 megtekintés ) [ 0 trackbackek ] permalink ( 3.2 / 231 )
Genesis Pro GP6308S console output 

I have receieved a GenesisPro GP6308S DVR recorder. I have read in the user manual that it runs Linux, so I could not missed taking into pieces and check the console output on it.

At first a short HW overview:

HiSilicon HI3515SoC
256MB DDR2 RAM (2 pcs. Hynix H5PS5162GFR)
8 MB flash (Spansion S29GL064N90)
Realtek RTL8201CP NIC
2 pcs. NVP1114 4 ch video decoder
DS13072 RTC

Pics:




The CN5 and CN7 are USB ports.

Read more...
[ hozzászólás ] ( 714 megtekintés ) [ 0 trackbackek ] permalink ( 3 / 355 )
Freescale CodeWarrior for MobileGT 9.2 - MPC5125 under Linux 

Do you want to use Codewarrior for MobileGT 9.2 under Linux for debugging/developing to MPC5125?

The stock installation of the CW did not supports the MPC5125 and the MPC5123. You can download an upgrade to support these CPUs, but it is available for windows only. No problemo, after running some cabextract I was able to extract the upgrade contents. After some directory renaming and restructuring I had created the same directory structure as my Linux CW installation has.

The next archive could be extracted to the CodeWarrior main folder. (In my case this was the
/opt/Freescale/MGT-9.2/CodeWarriorIDE/CodeWarrior)

It will overwrite two files. Backup them before doing it this.
http://dl.dropbox.com/u/4295670/crio/Co ... PC5125.rar

Good luck to everyone who is using this stuffs!
[ hozzászólás ] ( 13 megtekintés ) [ 0 trackbackek ] permalink ( 3 / 214 )
Daily OpenWRT build fail: .attempt to use poisoned "bcopy"  

Today building the daily OpenWRT snapshot for my NSLU2 failed with an error:


../include/obstack.h:153: error: attempt to use poisoned "bcopy"


Read more...
[ hozzászólás ] ( 45 megtekintés ) [ 0 trackbackek ] permalink ( 2.9 / 296 )
Daily Qt sapience - Qt Embedded and tslib 

I have stucked several times with touchscreens and Qt.
My problem's main reason is that I compiled the Qt and tslib outside the openembedded, because I did not liked the Openebmedded's Qt building method. (Build Qt twice once cross compiled, once for the host.)

I have stucked several times in the following situation:
ts_calibrate calibrates, and ts_test works fine, but my Qt app cursor's moves inverse, or it too sensitive or whatever.

Well it seems to be that the various tslibs do not like another,
and their configuration files are not interchangable. And the best one: Qt app likes to work only with the tslib with what it had been compiled.

So if you ran into the similar problem:

Clean up all your existing tslib stuff:

rm -rf /usr/lib/ts
rm -rf /usr/lib/libts*
rm -rf /usr/bin/ts_*


And place your own compiled tslib's binaries, and plugins there.

After then set the following enviroment variables properly of coures:


export TSLIB_TSEVENTTYPE=INPUT
export TSLIB_CONSOLEDEVICE=none
export TSLIB_FBDEVICE=/dev/fb0
export TSLIB_TSDEVICE=/dev/input/touchscreen0
export TSLIB_CALIBFILE=/etc/pointercal
export TSLIB_CONFFILE=/etc/ts.conf
export TSLIB_PLUGINDIR=/usr/local/tslib/lib/
export LD_LIBRARY_PATH=/usr/local/tslib/lib


Run ts_calibrate

And finally run your Qt app with -qws option.

[ hozzászólás ] ( 14 megtekintés ) [ 0 trackbackek ] permalink ( 3 / 415 )

<< <Előző | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | Következő> >>

 
számláló