The LiDAR Range Wars - Mine Is Longer Than Yours |
Üdvözöllek a Fórumban! ( Bejelentkezés | Regisztráció )
![]() ![]() |
The LiDAR Range Wars - Mine Is Longer Than Yours |
![]()
Létrehozva:
#1
|
|
Advanced Member ![]() ![]() ![]() Csoport: Members Hozzászólások: 197 Csatlakozott: 18-April 21 Azonosító: 1,697 ![]() |
The LiDAR Range Wars - Mine Is Longer Than Yours
![]() The LiDAR wars are heating up. Not surprising since 6 companies have gone public in the past 6 months and become LUnicorns via SPAC (Special Purpose Acquisition Companies) mergers. Billion dollar valuations, the pressure of reporting quarterly losses, and the need to boost their stock prices has led essentially to a LiDAR range war. Specifically, how far can the LiDAR “see” and recognize cars, pedestrians, animals, hazards, road debris, etc. Eye safety considerations limit LiDARs at 8XX-9XX nm to lower ranges than at 14XX-15XX nm. The latter can use higher laser power because the human cornea absorbs light at this wavelength, limiting damage to the retina. Higher wavelengths are expensive (2-3X relative to 8XX-9XX nm systems). Companies operating at these wavelengths need to justify the higher LiDAR cost, and range performance seems to be an important argument at this point. Princeton Lightwave and Luminar were the first to announce and demonstrate 200-300 m ranges with their 15XX nm automotive LiDAR. Aeva announced recently that their 15XX nm Frequency Modulated Continuous Wave (FMCW) LiDAR can detect cars at 500 m and pedestrians at 350 m. Prior to this, Aeye advertised a 1000 m range for detection of cars. Not to be outdone, Argo announced recently that its Geiger Mode LiDAR operating at > 1400 nm wavelength has a range of 400 m (Argo acquired Princeton Lightwave in 2017). Argo claims that its LiDAR allows it to detect cars with 1% reflectivity at night (the night statement is a bit confusing since for Geiger Mode, the more challenging situation is in bright sunshine). It is not clear whether the 400 m range is achievable in bright sunlight with a 1% reflective object (that would be pretty groundbreaking !), and whether apart from detection, object recognition is also possible under these conditions. LiDAR range is important for L4 autonomous vehicles (AVs), but the specification is nuanced. For safety critical obstacle avoidance, the AV perception engine needs to recognize road hazards in adequate time to enable safety maneuvers like braking to avoid tire debris. What matters is the range for a particular object reflectivity (10% seems to be a reasonable standard) and a high confidence level (> 99%) of the hazard recognition (otherwise, the false alarm rate would be very high, causing constant braking and leading to passenger discomfort and complaints). It is worth noting that there is a difference between detection (”something is out there but we don’t know what it is”) and recognition (”the something out there is a stalled car or a pedestrian”). Too often, range numbers are thrown around that relate to detection, which is generally not actionable. Recognition is a more difficult problem that relies on the resolution (see below) and the accuracy of real time image processing. AVs use their sensors, perception engines and artificial intelligence to apply five basic control actions: brake, steer, accelerate , decelerate or park. By far, the most critical and time/safety sensitive action is braking when obstacles emerge. The braking distance (distance required to reduce velocity to zero) is a function of the initial vehicle speed and a safe/comfortable deceleration (typically 0.3g or about 3 m/s2). The required perception range is a function of the vehicle velocity and the latency. Latency is the time interval between acquiring raw sensor data and applying the safety action (in this case, braking), and impacts the required range because the vehicle continues to move during this period. Higher latency demands lower operating vehicle speeds or higher range. Figure 1 shows the relationship between these three quantities. Read More : pg สล็อต |
|
|
![]() ![]() ![]() |
Szöveges verzió | A pontos idő: 16th August 2024 - 05:08 PM |