TFT PMOD LCD displaying video |
Üdvözöllek a Fórumban! ( Bejelentkezés | Regisztráció )
TFT PMOD LCD displaying video |
![]()
Létrehozva:
#1
|
|
Advanced Member ![]() ![]() ![]() Csoport: Members Hozzászólások: 480 Csatlakozott: 8-September 18 Azonosító: 761 ![]() |
I designed the hardware a couple of years ago but recently I had to do a project where I needed to use the Vivado block diagram interface. I thought it was pretty cool how fast it was to put a design together so I went about making an IP Core that controlled the PMOD.
|
|
|
![]() |
![]()
Létrehozva:
#2
|
|
Advanced Member ![]() ![]() ![]() Csoport: Members Hozzászólások: 261 Csatlakozott: 28-October 18 Azonosító: 884 ![]() |
Yes in the sketch that's what i've been doing and that's simple enough to be honest. But I don't know what to do when i use a BMP how do i change that? I've tried to convert it to CMYK but with no joy. Still had the color problem on the screen. Thank you for your help.
|
|
|
![]()
Létrehozva:
#3
|
|
Member ![]() ![]() Csoport: Members Hozzászólások: 10 Csatlakozott: 22-December 18 Azonosító: 1,016 ![]() |
Yes in the sketch that's what i've been doing and that's simple enough to be honest. But I don't know what to do when i use a BMP how do i change that? I've tried to convert it to CMYK but with no joy. Still had the color problem on the screen. Thank you for your help. With regards to the backlight, the only thing I can suggest is a small modification to the module. On the back of the module there is a small black surface mount resistor marked 331. If you where to change this to something slightly lower such as a 220 ohm resistor, this will improve the backlight. |
|
|
![]() ![]() ![]() |
Szöveges verzió | A pontos idő: 20th August 2024 - 09:14 PM |