FZG,YZG Square and Round Static Vacuum Drier  
     
  Vacuum dry is to let the raw material to be dried at vacuum condition heating and drying .It used vacuum pump to pump damp and make the working chamber form vacuum status. Therefore the dry speed pf raw material is quickened and the energy is saved greatly.  
     
  Vacuum dry is divided into static and dynamic drier. Model FZG round vacuum drier or Model FZG square vacuum drier belongs to static drier. Model SZG double cone rotating vacuum drier belongs to dynamic drier. When raw material is dried in static drier, raw material is in static state and its shape can not destroy. Before drying, it can carry out the treatment of disinfections. When raw material is dried in dynamic drier, raw material is turned over ceaselessly. S0 it can be dried better and more uniformly.  
     
  In the state of vacuum, the boiling point of raw material will be dropped. Therefore it is suitable for drying raw materials that are unstable or thermal sensitive. The vacuum drier also has good air-tightness. So it is also suitable for drying raw materials that contain strong irrigative and toxic gases and the solvent needs to recover.  
 
 
  The vacuum drier has been wide used for pharmaceutical industry, chemical industry, foodstuff industry, dyestuff industry and so on. Air is in conformity with the requirements of GMP.  
     
  Main Technical Specifications:  
     
 
Name YZG-600 YZG-800 YZG-1000 YZG-1400A FZG-15
Inner size of drying chamber Ø600¡Á976 Ø800¡Á1247 Ø1400¡Á2054 Ø1400¡Á2054 1500¡Á1400¡Á122
Outer size of drying chamber 1135¡Á810¡Á1020 1700¡Á1046¡Á1335 1639¡Á1190¡Á1500 2386¡Á1675¡Á1920 1513¡Á1924¡Á2060
Layers of baking support 4 4 6 8 8
Interval 81 82 102 102 122
Size of baking tray 310¡Á600¡Á45 520¡Á410¡Á45 520¡Á410¡Á45 460¡Á640¡Á45 460¡Á640¡Á45
Quantity of baking tray 4 8 12 32 32
Working pressure inside the pipe of baking support ¡Ü 0.784 ¡Ü 0.784 ¡Ü 0.784 ¡Ü 0.784 ¡Ü 0.784
Operation temperature of backing support 35-150 35-150 35-150 35-150 35-150
Vacuum inside the chamber when operation in idle -0.1 -0.1 -0.1 -0.1 -0.1
under the condition of-0.1 MPa and 110¡æ,evaporation rate of water 7.2 7.2 7.2 7.2 7.2
When condenser is used. Model, and power of vacuum pump 2X-15A 2KW 2X-30A 3KW 2X-30A 3KW 2X-70A 5.5KW 2X-70A 5.5KW
When condenser is not used Model and power o vacuum pump SZ-0.5 1.5KW SZ-0.5 2.2KW SZ-1 2.2KW SZ-2 4KW SZ-2 4KW
Weight of drying chamber 250 600 800 1400 2100
 
  Note: SZ water ring vacuum pump can be used together with mechanical pressure increasing pump in order to increase vacuum.  
     
  NOTICE IN ORDER  
     
  1. When order, please choose suitable vacuum drier in accordance with the physical property, primary moisture and final moisture of raw material to be dried and factors such as temperature, vacuum, drying amount and time and so on. Vacuum drier with same model has four heating ways, i.e. steam, hot water, heat conduction oil and electric heat. For example, in order to increase the output of product, the drying layer can be increased suitably. Please. Tell our factory in time.  
     
  2. The auxiliary parts of vacuum drying system indicated in user's Manual can be supplied and installed by our factory. Please indicate them when order.  
     
  3. If having special requirements, our factory can also design, manufacture and install as request.  
     
  4. For the equipment, our factory will carry out guarantee of repair replacement and refund of substandard products. All subassembly can be supplied in a long time. Please put your mind at rest.