It is solely possible to connect glow lamps 230 Volt ~, never use quartz or fluorescent lamps! It is advisable to place within the 230V~ current supply a fuse of 10 Ampere! Please observe at any circumstances the VDE-safety regulations! For example, complete touch-protection of all elements carrying current, earthing of all metal lamp sockets, pull-relief of all cables, etc. We recommend to have the mounting before the first operation tested by an expert!
Short circuits and overloads will lead to the immediate destruction of the thyristors!
In case that during operation one of the channels of the microphone music light won't react, it is necessary to turn down slightly one of the channels which possibly flashes too much.
Fitting case: KEMO G010
Price group 9
Technical data
Operating voltage: 230V~
Total load: approx. 3000W
Load per
channel: max. 500W
Board: approx. 100 x 70 mm
Safety instruction:
For all kits and modules which come into contact with a voltage higher than 40V, the VDE - safety instructions must be observed! The installation resp. initial operation may only be done by an expert! The most important safety instructions are: Protection against accidental contact for all metallic parts which can carry more than 40V current. Strain reliefs at all cables! In case of defect, components or the module can burst! Therefore the module resp. the printed circuit board have to be installed in such a way that in this case as well as in case of fire no damage occurs (installation into earthed metallic cupboards or earthed metallic casings and superposing of safety fuses).