HomeAdobe house - 2020

Door replacements

Now there’s a little chronological confusion, but I didn’t want to negotiate each door replacement separately.




The doors waiting to be installed are finally out of the way. This is also necessary because where there is already a ceiling there can be a little heating,

but if the rooms cannot be separated by doors, it is unlikely because all the heat goes out on the roof.




The door on the kitchen partition wall could be fine-tuned by carving the wooden beam above it to level it with the other rooms.
Below the threshold, here too, we managed to make a perfect gap by planing the slats.




The pantry door also waited long enough for it to be installed. I just avoided it long enough.




The balcony door, which was in the kitchen, looked pretty bad insulation, so it was also replaced.




There was also a small threshold to be made here because the concrete underneath was in a rather ramaty condition.




The standard 210cm high door is only so high, so unfortunately the part above it had to be replaced ...




The original frame of the great room door was 1.25m wide. The widest door I could get was 1m wide, so the wall was loaded with 5cm Ytong on both sides.
So at least the edges will be beautiful. Needless to say, this lasted the longest.






<< Back <<