Avaya/Nortel 1120E IP Phone 

CPU: BCM1103
Flash: MX29LV640 (8MByte)
RAM: HY5DU561622ETP (32MByte)
2x Broadcom B5011A GbE PHY
LCD: Ultra Chip UC1611 (UC1611F8 is written to the flex part of the LCD)
Pictures later...
[ hozzászólás ] ( 12 megtekintés ) [ 0 trackbackek ] permalink ( 3.1 / 226 )
How to make the QtCreator to not build the project when typing '{' with hungarian layout @ Windows 

The Hungarian layout uses the AltGr+B combination for the { character.
It is a little bit annoying to get the project built every time.
To turn off this shortcut:

Go to Tools > Options > Enviroment >Keyboard tab > Qt4Builder section > Build file.
And clear the shortcut.

[ hozzászólás ] ( 12 megtekintés ) [ 0 trackbackek ] permalink ( 3.1 / 314 )
The vbasc file extension.... 

... is a file extension used by the VeriBest PCB.
This software was used in the 90ies until the Mentor Graphics aciquired them:
http://www.electronicsweekly.com/news/a ... p-1999-11/
[ hozzászólás ] ( 5 megtekintés ) [ 0 trackbackek ] permalink ( 3.1 / 267 )
How to remove parts from the board created with negasilk.ulp in EAGLE 

The EAGLE will name them U$[n]. Open up your board in an XML editor look for the elements coming from the library then you will find the refdes of the part. Then type DELETE U$[n] to the command field and hit enter in the board editor.
[ hozzászólás ] ( 5 megtekintés ) [ 0 trackbackek ] permalink ( 3 / 335 )
Whe Cypress FX2 shows up in device manager with error code 43 

If your Cypress FX2 based board fails to enumerate with "Windows has stopped this device because it reported problems. (Code 43)" error:


... then check that you have not swapped the D+ and D- pins.
[ hozzászólás ] ( 4 megtekintés ) [ 0 trackbackek ] permalink ( 2.9 / 264 )

<< <Előző | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | Következő> >>

 
számláló