Building libkode & kxml_compiler on system having Qt4 & Qt5 

export USE_QT_VERSION=4; cmake -DQT_QT_INCLUDE_DIR=/usr/include/qt4 -DKDE4_BUILD_TESTS=ON -DQT_QMAKE_EXECUTABLE=/usr/bin/qmake-qt4


[ hozzászólás ] ( 1 megtekintés ) [ 0 trackbackek ] permalink ( 3.1 / 208 )
Avaya/Nortel 1120E IP Phone 

CPU: BCM1103
Flash: MX29LV640 (8MByte)
RAM: HY5DU561622ETP (32MByte)
2x Broadcom B5011A GbE PHY
LCD: Ultra Chip UC1611 (UC1611F8 is written to the flex part of the LCD)
Pictures later...
[ hozzászólás ] ( 12 megtekintés ) [ 0 trackbackek ] permalink ( 3.1 / 226 )
How to make the QtCreator to not build the project when typing '{' with hungarian layout @ Windows 

The Hungarian layout uses the AltGr+B combination for the { character.
It is a little bit annoying to get the project built every time.
To turn off this shortcut:

Go to Tools > Options > Enviroment >Keyboard tab > Qt4Builder section > Build file.
And clear the shortcut.

[ hozzászólás ] ( 12 megtekintés ) [ 0 trackbackek ] permalink ( 3.1 / 311 )
The vbasc file extension.... 

... is a file extension used by the VeriBest PCB.
This software was used in the 90ies until the Mentor Graphics aciquired them:
http://www.electronicsweekly.com/news/a ... p-1999-11/
[ hozzászólás ] ( 5 megtekintés ) [ 0 trackbackek ] permalink ( 3.1 / 264 )
How to remove parts from the board created with negasilk.ulp in EAGLE 

The EAGLE will name them U$[n]. Open up your board in an XML editor look for the elements coming from the library then you will find the refdes of the part. Then type DELETE U$[n] to the command field and hit enter in the board editor.
[ hozzászólás ] ( 5 megtekintés ) [ 0 trackbackek ] permalink ( 3 / 332 )

<< <Előző | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | Következő> >>

 
számláló