[Retro]Coca cola: Legyen egy saját városod karácsonyra 

Rendhagyó bejegyzés a mai, nem valami tech anyázás, hanem egy kis múltbarévedés következik.

[s]Valamikor a kilencvenes évek végén/kétezres évek elején[/s]
1997-karácsonyán (Infóért köszönet Tamásnak!) volt egy karácsonyi Coca-cola promóció amiben az üdítőitalokhoz papírból kitördelhető papírházakat adtak. Az évet még csak megsaccolni sem tudom, az internet egyszerűen nem ismeri az "Legyen egy saját városod karácsonyra coca cola" kifejezést. Édesapám jóvoltából anno az egész kollekció megvolt, de az idők során teljesen elkoptak otthonról az ilyen jellegű karácsonyfadíszek.

A minap egyik rokonnál előkerült a "Panzió" fedőnevű eleme a sorozatnak.





Érdemes megfigyelni az illesztések viharvertségét, illetve az apró gegeket a házikón. Gyerekkoromóta akárhányszor került ilyen a kezembe valahogy mindig olyan érzésem támad, hogy a grafikusoknak sikerült valamit nagyon eltalálniuk.


Update 2019.12.20:
Némi közösségi összefogásnak köszönhetően a házakat digitalizáltuk, és készítettünk belőle egy online galériát:
https://legyenegysajatvarosod.github.io
[ 29 hozzászólás ] ( 694 megtekintés ) [ 0 trackbackek ] permalink ( 2.9 / 263 )
Do not trust in Genius! 

I have bought a Genius Facecam 321 to use with mjpg-streamer on Linux.
The packaging mentioned MJPEG as supported format, but it is lying!
The camera only supports YUV both on Windows and Linux :(

[ hozzászólás ] ( 21 megtekintés ) [ 0 trackbackek ] permalink ( 3 / 272 )
What's inside the AI Thinker A6 GSM modem? 

I have not been able to find anything more detailed about the internals of the AI Thinker A6 GSM modem.

I bought one, fired up my heat air gun and:


We can see two major components:

A RDA8851MS controller and a RDA6625e frontend

At the same time I am looking for an SDK to it. So called CSDTK.
[ hozzászólás ] ( 55 megtekintés ) [ 0 trackbackek ] permalink ( 2.9 / 299 )
Getting started with NewPos NEW6210 mPOS 

I have got a NewPos NEW6210 mPOS to do some application development.

I wanted to get the development env rolling on my Ubuntu 14.04
The manual suggests using 32 bit RedHat Enterprise Server 6 x86 32bit version, but you know no pain no gain.

The documentation and the overall quality of the support is something what you expect from a typical chinese company. You got an FTP access and figure out what you need.

So let's get a gcc to compile a hello world. The official toolchain is based on a 32 bit glibc-oabi-toolchain-arm-generic compiler.

To get this tool working you will need a 32 bit build of the mpfr-2.4.2 (the manual lists it as reqirement too -- Because this toolchain uses a high grade version of GCC toolchain, --).
You can grab it from here:
http://www.mpfr.org/mpfr-2.4.2/mpfr-2.4.2.tar.bz2

Some things are changed around the gmp so replace all occurrences of __gmp_const with a simple const. (Do it with sed or whatever you like).
./configure --prefix=/usr "CFLAGS=-m32" "CXXFLAGS=-m32" "LDFLAGS=-m32"
To compile it to 32 bit you will need to set the proper cflags.
./configure --prefix=/usr "CFLAGS=-m32" "CXXFLAGS=-m32" "LDFLAGS=-m32"

After installing it the cross compiler will claim about the missing libgmp.so.3.

Install the 32 bit version of the libgmp10 lib with:
sudo apt-get install libgmp10:i386

Then create a symlink:
sudo ln -s /usr/lib/i386-linux-gnu/libgmp.so /usr/lib/i386-linux-gnu/libgmp.so.3

Aaaannnd at this point we have a somewhat working crosscompiler.

ATM I cannot ssh to the target, as the manual says, so stay tuned!

I have a system bootlog from UART, which reveals some deeper details about the HW:

[secu] S-Boot: v1.0.6_C (2014-12-25 14:31:09)
[secu] DDR initialization...
[secu] Reset DDR Controller
[secu] Configuring DDR
[secu] mclk = 133, auto refresh = 0x3df
[secu] DDR DLL locked...!!!
[secu] Doing DDR data eye training sequence ....
[secu] DDR data eye training sequence passed...!!!
[secu] Tamper Status: None
[secu] Boot(3): 2016-08-30 12:34:08
[secu] NAND: ESMT NAND 128MiB 1,8V 16-bit, ID = 0xc8-0xb1
[secu] U-Boot loading from NAND 0x20000 ==> 0x41bfffc0 0x670e8 bytes
[secu] Switching to Open mode... Done
[open] Start U-Boot at 0x41c00000 ...
U-Boot 2011.12-svn499 (Jun 18 2015 - 09:16:15)
Copyright (C) 2012 by LiHua_338@163.com
U-Boot code: 41C00000 -> 41C60338 BSS: -> 41CA3338
CPU: BCM5892-0300
FCLK: 400 MHz
HCLK: 133 MHz
MCLK: 133 MHz
PCLK: 66 MHz
DRAM: 64 MiB
NAND: 128 MiB
*** Warning - bad CRC, using default environment
LCD Type: 320*240ch
hx8347_hw_init ID: 95
LCD Chip: 0x00008347
In: serial
Out: serial
Err: serial
Update by USB: None
Update by local: None
Hit any key to stop autoboot: 0

Search kernel...Creating 1 MTD partitions on "nand0":
0x000000600000-0x000004000000 : "mtd=2"
Loading kernel: 0%Loading file '/boot/uImage' to addr 0x40400000 with size 2153084 (0x0020da7c)...
Done
Booting kernel ... ## Booting kernel from Legacy Image at 40400000 ...
Image Name: Linux-2.6.32.65-bcm5892-secure
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2152564 Bytes = 2.1 MiB
Load Address: 40008000
Entry Point: 40008000
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.460000] bootmemheap_init: Error - bootmemheap_setup() not called
INIT: version 2.88 booting

INIT: Entering runlevel: 3
$Install driver fusion: [ 4.050000] fusion: unable to register major 250. Registered 248 instead
[ OK ]
$Install driver bcm589x_otg: [ OK ]
$Install driver g_serial: [ OK ]
$Install driver bcm589x_spi: [ OK ]
$Install driver leds: [ OK ]
$Install driver beeper: [ OK ]
$Install driver matrix_keys: [ OK ]
$Install driver bcm5892_adc_driver: [ OK ]
$Install driver touch_screen: [ OK ]
$Install driver iso7816_uart: [ OK ]
$Install driver iccard: [ OK ]
$Install driver nfc: [ OK ]
$Install driver nfc_pn512: FATAL: Error inserting nfc_pn512 (/lib/modules/2.6.32.65-bcm5892-secure/kernel/drivers/char/nfc/nfc_pn512.ko): No such device
[FAILED]
$Install driver nfc_rc663: [ OK ]
$Install driver magstripe: [ OK ]
$Install driver idtechencmag: [ OK ]
$Install driver bcm589x_pm: [ OK ]
$Install driver dhd: [ OK ]
$Install driver pdriver: [ OK ]
$Install driver pdriver_file: [ OK ]
$Install driver pdriver_printer: [ OK ]
$Install driver pdriver_uart: [ OK ]
$Install driver modem: [ OK ]
$Install driver slnsp: [ OK ]
$Install driver cx930xx: [ OK ]
$Install driver bcm_new_udc_dwc: [ OK ]
$Starting mdev: [ OK ]
$Setting clock (localtime): Tue Aug 30 12:34:22 CEST 2016 [ OK ]
$Starting network: [ OK ]
$Starting system logger: [ OK ]
$Starting kernel logger: [ OK ]
$Starting system message bus: [ OK ]
$Starting system update:

[ hozzászólás ] ( 82 megtekintés ) [ 0 trackbackek ] permalink ( 2.9 / 332 )
Poor man's LED in Qt 

Create a square label with fixed size, let's say 24*24px.

Use the following stylesheet:
"background-color: rgb(85, 255, 0); border-radius: 12px;"

Change/clear the stylesheet when the LED is off.
[ hozzászólás ] ( 5 megtekintés ) [ 0 trackbackek ] permalink ( 2.9 / 337 )

<< <Előző | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | Következő> >>

 
számláló