DRC320SH-7H800A motor details 

It took me a while to find a proper replacement motor (identical to the original) for a front brush of a Sencor SRV4250 hoover. Motor gearbox nr. BL500-T2
No load current consumption at 12V: 15 mA
No load current consumption installed into the greased gearbox 12V: 25 mA
Stall current: 190 mA @ 12V
[ hozzászólás ] [ 0 trackbackek ] permalink ( 2.7 / 7 )
UX-52 VFD frequency controller teardown images 

I bought one and opened up, to save you from doing that :D.

[ hozzászólás ] [ 0 trackbackek ] permalink ( 3 / 142 )
QTableView scrollToBottom anomaly 

Never call QTableView::scrolltoBottom from slots connected to the model's rowsInserted signal because as the rows added they will start to appear partially:

Connect your slots to the QTableView::verticalScrollBar's rangeChanged signal

[ hozzászólás ] [ 0 trackbackek ] permalink ( 2.9 / 148 )
Dewalt N599252 teardown 

Got a broken Dewalt DCG414 angle grinder to look for the issue.

It has a 54V BLDC motor with builtin ESC mfr P/N: N599252.
The only option is to buy the ESC with the motor and the trigger circuit for ~180 GBP...

I removed the ESC from the motor. The ESC is potted with some PUR resin, so I started to carefully remove it.

It turned out that the low side MOSFETs were blown.

[ hozzászólás ] ( 3 megtekintés ) [ 0 trackbackek ] permalink ( 3 / 162 )
Bburago Bluetooth Car (Shell promotion) 

The Hungarian Shell pleased us again with a Bluetooth toy car promotion, this time with Ferrari models branded as Bburago.

I have a Nissan Formula-e car (made by Brandbase) from the previous campaign, and I was curious to see the differences.

Fortunately my colleague SJ already scored one and allowed me to take it apart.

The construction is a bit different: the battery/electronics unit is built-in unlike the Brandbase one:

The steering is similar (dc motor without end limits):

Main PCB marking: KCE210119

Smart, module based design.
BLE MCU marked with YC1063 UG6860. Possibly YiChip YC1063 Many thanks to David for the tip!
Two (supposedly H bridge) SOT-23-2 marked with SA1016 (U2 and U6).
Lipo charger marked with B137 70pJ.

Battery has 100 mAh printed on it and it is supposed to be a Huahui HFC1025 LiFePo4? single cell.

[ hozzászólás ] ( 5 megtekintés ) [ 0 trackbackek ] permalink ( 3 / 163 )

| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Következő> >>