Accessories for fastening of sandwich panels

The correct use of sandwich panels it is important to select the correct recording. The record of the supporting structure must be chosen on the basis of the type and very important for the safety, stability and maintenance purposes. The recordings are generally divided into two groups: structural and non structural fixings.The first group of the roof and side panels to ensure wears the device and is guaranteed to withstand the load. The second group however, only the additional elements should be to fix the panels or plates must be fixed to one another. The structural elements on the location and number of fasteners for the roof panels from the supports number of edges in the angle of the wind basis, has decided but in any event is allowed to be less than 2 pieces per square meter. The roof, eaves and any front panel of all proportion to the ridge tops should be fastening.

Structural attachment to ISOCOPRE or EUROCOPRE panel on the structure of the metal skeleton	HRÚBKLA PANELU	Screw length(Recommended)
Used to strengthen self-drilling screws with nylon head, 6.3 mm diameter and various length, with coloured plate and PVC surfaces depending on the thickness of the panel.	30 mm. 40 mm. 50 mm. 60 mm. 80 mm.	Diameter 6,3 x 100 mm. Diameter 6,3 x 110 mm. Diameter 6,3 x 120 mm. Diameter 6,3 x 130 mm. Diameter 6,3 x 150 mm.

 

ŠTRUKTURÁLNE UPEVNENIE K ISOPAR ALEBO EUROCOPRE PANELOM NA ŠTRUKTÚRE KOVOVEJ KOSTRY	Panel thickness	Screw length(Recommended)
Used to strengthen self-drilling screws with nylon head, 6.3 mm diameter and various length, with coloured plate and PVC surfaces depending on the thickness of the panel.	30 mm. 40 mm. 50 mm. 60 mm. 80 mm. 100 mm.	Diameter 6,3 x 60 mm. Diameter 6,3 x 60 mm. Diameter 6,3 x 80 mm. Diameter 6,3 x 80 mm. Diameter 6,3 x 100 mm. Diameter 6,3 x 120 mm.

 

ŠTRUKTURÁLNE UPEVNENIE K ISOCOPRE ALEBO EUROCOPRE PANELOM NA ŠTRUKTÚRE drevoje KOSTRY	Panel thickness	Screw length(Recommended)
Used to strengthen self-drilling screws with nylon head, 6.5 mm diameter and various length, with coloured plate and PVC surfaces depending on the thickness of the panel.	30 mm. 40 mm. 50 mm. 60 mm. 80 mm.	Diameter 6,3 x 100 mm. Diameter 6,3 x 110 mm. Diameter 6,3 x 120 mm. Diameter 6,3 x 130 mm. Diameter 6,3 x 150 mm.

Technical elements

Opening skylights When you create a practical roof and strong, useful and mansard types or the roof exists may be a light to the lower (sub) spaces. The bottom of the roof painted in a thick steel 10/10, perfectly matched to the six vertebrate ISOCOPRE version. Unbreakable polycarbonate glass, gas guiding system. The opening of a manual, the standard sizes are 600*600 mm. Grayish white, red and brown colours.   Cut-out elements Chimneys or other technical equipment for wiring, ISOCOPRE roof panels. 10/10 thick painted steel base is in the form of panels adapted to form a flat surface part (standard size 600*600 mm), which is the required size may be cut off. It is recommended and appropriate seal is applied in this case, the cut surface. Greyish white, red and brown colours.   Chimney The roof vent cover for battery units, which guarantees the six panels of vertebrate ISOCOPRE a perfect fit. The stack of maximum diameter of 120 mm and be fitted to any roof angle. Painted aluminum finish, greyish white, red and brown colours.   Built -in window The industrial architecture in an integrated and innovative solutions to suitable for pre-embedded in ISOPAR panel window. The dimensions are as required, the used materials: shatterproof tempered crystal, double glass and polycarbonate. It is possible to shorten the project duration and reduce the construction costs with this solution. 30 to 60 mm thick panels are available.

Closing parts of the sandwich panel

These parts will find solutions for all types and models ISOCOPRE and EUROCOPRE.
 

Material:	Painted steel 5/10 thick or as requested Painted aluminum 6/10 of a thick or as requested Copper 6/10 thick or as requested
Colour:	Greyish-white, brown, siena red with extra colours on request
Sizes:	Standard length 3 m

 
 

	Side closure Suitable to cover the side walls of state and non state covers.d
	Front closure Those cases where the roof panel must be connected to a wall opposite.
	Back closure The upper edges of the pa nels are protected if a roof is prominent, you can apply.
	Gutter An useful feature on the roof, entrance hall, where there is little wind. It is possible to raise the funnel to the gutters.
	Ridge-cut overlapping element Formed a double hinge element, ISOCOPRE, EUROCOPRE panels combine.
	SNEHOVÁ ZÁBRANA Cover design safer
	SILUETTE Closure and ISOCOPRE, EUROCOPRE type of panels up to 50 mm. Making it the perfect visual effects and greater protection we can provide for the panels. Painted steel panels 30,40, 50 mm and thicknesses are available. Other thicknesses are manufactured only upon request.
	NeRidge-cut overlapping element Format hinge component installation, sloping roofs, suitable for connecting the upper.
	Spine Pads (Pad ridge) Essential structures of the metal links between the bottom of the sloping roofs.
	Side profile support The panel is hanging out over empty backbone booster used illuminates a fixed record. It is recommended for a sponge is inserted into the profile seal cavity, thereby preventing the possible formation of condensation.
	Ridge seal washer Padded sealant, which must be placed under the metal washer, particularly in the less sloping roofs is recommended.
	Paint repair Special spray paint the panels to improve when they face accidentally scratched or damaged. Greyish-white, siena red, brown colours available.