 |
|
|
 |
 |
BizVerify |
|
| Luen Cheong Printing Equipment Group Limited |
| Verified By : SMR |
| Verified Date : 2008-11-17 |
|
 |
|
|
|
|
|
|
|
|
|
| DUBUIT solvent ink /8500 /100 series |
|
|
| Model No.︰ | 8500 series |
| Brand Name︰ | dubuit |
| Country of Origin︰ | France |
| Unit Price︰ | CNY ¥ 220 / pc |
| Minimum Order︰ | 1 pc |
|
|
Dubuit ink 8500/100 series
High gloss epoxy resin ink bicomponent
8500 series apply to glass, metal PP / PE, such as printing of plastic, with gloss good, strong adhesion, surface hardness, chemical resistance and good performance characteristics.
8292B curing agent under normal circumstances to meet the requirements of most customers. For special needs, please refer to table curing agents choose another option curing agent.
Prepared to deal with printing ink, please note the following:
1, reference is made to "choose as curing agent table," choose a suitable curing agent;
2, thinner in the amount of 10-30 percent, according to the specific amount of the actual printing conditions. Ink thinner divided into two kinds of standards and slow stem, in accordance with the actual need to select a suitable diluent. Select 8598 curing agent mixture directly after printing; if 3, optional 8599 curing agent, please static mixed after about 30 minutes to make ink and curing agents have sufficient time to respond, thereby enhancing the resistance of the layers of ink.
4, add the curing agent, the ink used to shorten the time, please refer to the specific situation in the table below the data provided.
The ink must be diluted with curing agents used in the curing agent after the start and ink add a response, the use of ink in the process of maintaining a relatively low viscosity. The viscosity of the ink used in the course of the whole gradually increased, the need to add appropriate amount of hardening agent, so that better maintain the printing ink viscosity.
Standard thinner DiluentB standard diluent
Slow stem thinner Retarder slow stem -
With the letterhead of the appropriate curing agent, 8500 series ink can be applied to a wide variety of printing more of: processing PP / PE, nylon (PA) of metal (stainless steel, aluminum, metallic paint, etc.), glass, pieces of plastic (Polopas, Pakelite), dealing with the PP sheet, as well as "formica" materials.
Printing recommendations mesh :40-120 T (based on the actual conditions of the application choose the right mesh)
Ink completely cured in 8500, the following material has excellent resistance: detergents, alcohol, perfume and solvents. Before the use of bulk pre-printing.
Note: metal color printing, recommended 77-90 T mesh. In the glass and aluminum, if the water resistance of the special requirements, and the option of 8598/8599 curing agent.
Poor mobility: If a bubble ink, orange peel, and other phenomena, can add 1-2% SH0032 flow to improve the level of ink.
Metal: Before printing on metal surfaces to conduct a thorough skim moving sewage treatment, this can greatly enhance the ink on the adhesion of these substrate.
Curing Agent Selection Table
Curing agent type
Add proportion of curing agent
After the deployment of storage period
Printing of
Drying process
8592B
White 15%
5-6 hours
General application, such as the handling PP / PE, glass and other metals
Heating (80 ℃)
Natural drying (25 ℃)
Color 15%
Dry Table
Completely dry
Dry Table
Completely dry
8598/8599
White 10%
8-10 hours
Glass, metal (to ink the water resistance, chemical resistance is very high requirements); added 8598/8599 curing agent after Mozi layer can not be delegated to stack-colour printing
8-10 minutes
30-40 minutes
15-20 minutes
2-3 days
Color 10%
8-10 minutes
30-40 minutes
15-20 minutes
|
|
|
|
|
|
|
|
|
|
|
