Upgrade routerstation firmware from Openwrt daily snapshot. 

Just a small note to myself, because I have forgotten it again.

Connect the RS board to your PC trough it's WAN port.
Give static IP to your PC in the 192.168.1.255 subnet.
(IP 192.168.1.1 mask: 255.0.0.0 gw: 192.168.1.20)

cd to your Openwrt's bin directory. (bin/ar71xx)
Power up your RS (trough POE) while holding down it's reset button.
You can release it when the RF led starts light.
Run tftp in the bin/ar71xx directory:

$tftp
binary
trace
put openwrt-ar71xx-ubnt-rs-squashfs-factory.bin


If the process is successful then wait 5-6 minutes. Once the upgrade is finished you the RS will reboot itself.
You will notice it because the wired connection is downed during the reset.

After the reboot it will wait a few minutes, because it erases jffs2 filesystem, and it is takes a long time.
Don't panic, it will finish it.


[ hozzászólás ] ( 13 megtekintés ) [ 0 trackbackek ] permalink ( 3.1 / 177 )

<< <Előző | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | Következő> >>

 
számláló