|
CPU: BCM1103
[ hozzászólás ] ( 12 megtekintés ) [ 0 trackbackek ] permalink Flash: MX29LV640 (8MByte) RAM: HY5DU561622ETP (32MByte) 2x Broadcom B5011A GbE PHY LCD: Ultra Chip UC1611 (UC1611F8 is written to the flex part of the LCD) Pictures later...    ( 3 / 1797 )
The Hungarian layout uses the AltGr+B combination for the { character.
[ hozzászólás ] ( 12 megtekintés ) [ 0 trackbackek ] permalink It is a little bit annoying to get the project built every time. To turn off this shortcut: Go to Tools > Options > Enviroment >Keyboard tab > Qt4Builder section > Build file. And clear the shortcut. ( 3 / 1826 )
... is a file extension used by the VeriBest PCB.
[ hozzászólás ] ( 5 megtekintés ) [ 0 trackbackek ] permalink This software was used in the 90ies until the Mentor Graphics aciquired them: http://www.electronicsweekly.com/news/a ... p-1999-11/ ( 3 / 1502 )
The EAGLE will name them U$[n]. Open up your board in an XML editor look for the elements coming from the library then you will find the refdes of the part. Then type DELETE U$[n] to the command field and hit enter in the board editor.
[ hozzászólás ] ( 5 megtekintés ) [ 0 trackbackek ] permalink ( 3 / 1732 )
If your Cypress FX2 based board fails to enumerate with "Windows has stopped this device because it reported problems. (Code 43)" error:
[ hozzászólás ] ( 4 megtekintés ) [ 0 trackbackek ] permalink  ... then check that you have not swapped the D+ and D- pins. ( 2.9 / 1896 )
|
