Daily Qt sapience - Qt Embedded and tslib 

I have stucked several times with touchscreens and Qt.
My problem's main reason is that I compiled the Qt and tslib outside the openembedded, because I did not liked the Openebmedded's Qt building method. (Build Qt twice once cross compiled, once for the host.)

I have stucked several times in the following situation:
ts_calibrate calibrates, and ts_test works fine, but my Qt app cursor's moves inverse, or it too sensitive or whatever.

Well it seems to be that the various tslibs do not like another,
and their configuration files are not interchangable. And the best one: Qt app likes to work only with the tslib with what it had been compiled.

So if you ran into the similar problem:

Clean up all your existing tslib stuff:

rm -rf /usr/lib/ts
rm -rf /usr/lib/libts*
rm -rf /usr/bin/ts_*


And place your own compiled tslib's binaries, and plugins there.

After then set the following enviroment variables properly of coures:


export TSLIB_TSEVENTTYPE=INPUT
export TSLIB_CONSOLEDEVICE=none
export TSLIB_FBDEVICE=/dev/fb0
export TSLIB_TSDEVICE=/dev/input/touchscreen0
export TSLIB_CALIBFILE=/etc/pointercal
export TSLIB_CONFFILE=/etc/ts.conf
export TSLIB_PLUGINDIR=/usr/local/tslib/lib/
export LD_LIBRARY_PATH=/usr/local/tslib/lib


Run ts_calibrate

And finally run your Qt app with -qws option.

[ hozzászólás ] ( 14 megtekintés ) [ 0 trackbackek ] permalink ( 3 / 241 )

<< <Előző | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | 34 | Következő> >>

 
számláló